HP LaserJet P2010 Service Manual - Page 20
Straight-through output path, Manual feed, Manual, Feed tray 1, Source Tray
View all HP LaserJet P2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
NOTE: When you add new media, make sure that you remove all of the media from the input tray and straighten the stack of new media. This reduces jams by preventing multiple sheets of media from feeding through the printer at one time. Straight-through output path Use the straight-through output path when printing envelopes, transparencies, heavy media, or any media that tends to curl when printed. If you open the straight-through output door before printing media from tray 1, tray 2, or optional tray 3, the media exits the printer through the straight-through output path. NOTE: Printed media does not stack when you use the straight-through output path. The media drops to the surface below unless you remove each sheet as it exits the printer. Manual feed You can use manual feed when printing mixed media. For example, you can use manual feed to print an envelope, then a letter, then an envelope, and so on. Load envelopes in tray 1 and load letterhead into tray 2. To print using manual feed, open the printer Properties or Printer Setup, and then select Manual Feed (tray 1) from the Source Tray drop-down list. See Configure the Windows printer driver on page 17 or Configure the Macintosh printer driver on page 19 for instructions. After you have enabled manual feed, press the Go button to print. 10 Chapter 1 Product basics ENWW