HP M4345 User Guide - Page 90
Load media, Load the flatbed scanner, Load the ADF, Load tray1 - mfp jamming
UPC - 882780548619
View all HP M4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Load media This section contains information about loading standard- and custom-size media into the input trays. CAUTION To avoid a jam, never add or remove paper from a tray while printing or copying from that tray. To avoid damaging the MFP, print labels and envelopes from tray1 only. Print on only one side of labels, envelopes, and transparencies. Load the flatbed scanner Place the document face-down on the scanner glass. Load the ADF Load the document face-up in the ADF. Load tray1 Tray1 holds up to 100 sheets of paper or 10 envelopes. For more information about supported media, see Select print media. Use the following procedure if tray1 is loaded continually with the same type of media, and the media is not usually removed from tray1 between print jobs. The following procedure can also increase the MFP performance when printing from tray1. CAUTION To avoid a jam, never add or remove media from a tray while printing from that tray. 1. Touch Copy. 2. Touch Paper Selection. 3. Touch Tray 1 Any Size. 4. Touch the correct media size. NOTE If you select Custom as the media size, also select the unit of measure and the X and Y dimensions. 5. Touch OK. 6. Touch OK again. 7. Open tray1. 78 Chapter 4 Media and trays ENWW