HP M4345 User Guide - Page 99
Load small sizes, custom sizes, or heavy paper, Weight and sizes, Guidelines for heavy paper - mfp fuser
UPC - 882780548619
View all HP M4345 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
For tray2 and the optional 500-sheet trays, load paper with the front side facing down, and the top, short edge toward the right. Load small sizes, custom sizes, or heavy paper Custom-size paper can be printed from tray1, tray2, or an optional 500-sheet tray. NOTE The MFP might print at a slower speed when printing on small sizes, custom sizes, and heavy paper. For more information about paper that has a special finish, such as laid or bond paper, see Load paper that has a special finish. Weight and sizes See the following table for specifications when printing on custom or heavy paper. Tray Tray1 Tray2 and optional 500sheet tray Minimum size Maximum size Supported weights 76x 127mm (3x5inches) 216x356mm (8.5x14inches) 60to200g/m2 (16to53lb) 148x210mm (5.8x8.2inches) 216x356mm (8.5x14inches) 60to120g/m2 (16to32lb) Guidelines for heavy paper To help prevent toner from rubbing off of the paper, some heavier paper types should be printed using a higher fuser mode. At the control panel, scroll to and touch Administration, touch Print Quality, and touch Fuser Modes.Touch the paper type that you are using. Set the fuser mode to High1 or High2. Using these modes helps prevent toner from rubbing off the page, but using them might slow the device speed or create other problems, such as increased curl. ENWW Load media 87