HP Pavilion 500 HP Pavilion desktop PCs - (English) Quick Start Guide - Page 95
Problem, Solution, Start, Control Panel, Printers and Other Hardware, Keyboard, Buttons, Apply, PS/2
View all HP Pavilion 500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 95 highlights
Problem When I push one of the special or multimedia buttons on the keyboard, nothing happens. My keyboard doesn't work, even though the computer and monitor seem to work. Solution Check the button configuration. To reconfigure the button: 1 Click Start on the taskbar. 2 Click Control Panel. 3 Click Printers and Other Hardware, if present. 4 Double-click Keyboard. 5 In the Keyboard Properties window that appears, click the Buttons tab. 6 Double-click the button you want to change. The button configuration window displays. 7 Choose the button capability from the drop-down list. Enter the Display Label and the Address. (For a Web site, enter the complete Web site URL in the Address box.) 8 Click OK. 9 On the Buttons tab, click Apply. 10 Repeat steps 6 through 9 for each button you want to reconfigure. 11 Click OK when you are finished reconfiguring the keyboard. If the PC beeps repeatedly or if nothing happens when you press keys, it's possible that the keyboard is connected improperly. PS/2 keyboards only: Check that the cable connector pins are straight. Make sure the keyboard is connected to the keyboard port, not to the mouse port. If you need to reconnect these two cables, turn the computer off, reconnect the cables, and then turn the computer back on. Try restarting the computer (click Start, select Turn Off Computer, and click Restart). If that doesn't work, press and hold the computer On button until the computer turns off (approximately five seconds). Then turn the computer back on. 70 HP Pavilion home PC