HP Pavilion dv6-6000 HP Pavilion dv6 Notebook PC - Maintenance and Service Gui - Page 101
Optical drive connector cable
View all HP Pavilion dv6-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Optical drive connector cable NOTE: The optical drive connector cable is included in the Cable Kit, spare part number 640422-001. The optical drive connector cable includes the optical drive connector. Before removing the optical drive connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 50), and then remove the following components: ● Optical drive (see Optical drive on page 51) ● Hard drive (see Hard drive on page 54) ● Keyboard (see Keyboard on page 61) ● Top cover (see Top cover on page 65) ● System board (see System board on page 78) Remove the optical drive connector cable: 1. Close the computer. 2. Turn the computer upside down, with the front toward you. 3. Release the optical drive connector cable (1) from the clips (2) and routing channel built into the base enclosure. Component replacement procedures 93