HP Pavilion dv6-6000 HP Pavilion dv6 Notebook PC - Maintenance and Service Gui - Page 84
Power connector cable, Reverse this procedure to install the USB board.
View all HP Pavilion dv6-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Reverse this procedure to install the USB board. Power connector cable Description Power connector cable Spare part number 640424-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 50), and then remove the following components: ● Optical drive (see Optical drive on page 51) ● Hard drive (see Hard drive on page 54) ● Keyboard (see Keyboard on page 61) ● Top cover (see Top cover on page 65) ● USB board (see USB board on page 75) Remove the power connector cable: 1. Disconnect the power connector cable (1) from the system board. 2. Release the power connector cable from the clips (2) built into the base enclosure. 3. Remove the two Phillips PM2.0×2.0 screws (3) that secure the power connector to the base enclosure. 76 Chapter 4 Removal and replacement procedures