HP Pavilion dv6-6000 HP Pavilion dv6 Notebook PC - Maintenance and Service Gui - Page 103

and the opening in the base enclosure.

Get HP Pavilion dv6-6000 PDF manuals and user guides View all HP Pavilion dv6-6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 103 highlights

Before removing the display assembly, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 50), and then remove the following components: ● Optical drive (see Optical drive on page 51) ● Hard drive (see Hard drive on page 54) ● WLAN module (see WLAN module on page 58) ● Keyboard (see Keyboard on page 61) ● Top cover (see Top cover on page 65) ● System board (see System board on page 78) Remove the display assembly: 1. Release the wireless antenna cables from the clips (1) and the opening in the base enclosure. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. 2. Remove the six Phillips PM2.5×5.0 screws (2) that secure the display assembly to the computer. NOTE: The left-most screw on the left hinge secures a display panel cable ground loop (3). 3. Remove the display assembly (4). Component replacement procedures 95

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
Before removing the display assembly, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery
on page
50
), and then remove the following components:
●
Optical drive (see
Optical drive
on page
51
)
●
Hard drive (see
Hard drive
on page
54
)
●
WLAN module (see
WLAN module
on page
58
)
●
Keyboard (see
Keyboard
on page
61
)
●
Top cover (see
Top cover
on page
65
)
●
System board (see
System board
on page
78
)
Remove the display assembly:
1.
Release the wireless antenna cables from the clips
(1)
and the opening in the base enclosure.
CAUTION:
Support the display assembly when removing the following screws. Failure to
support the display assembly can result in damage to the display assembly and other
computer components.
2.
Remove the six Phillips PM2.5×5.0 screws
(2)
that secure the display assembly to the computer.
NOTE:
The left-most screw on the left hinge secures a display panel cable ground loop
(3)
.
3.
Remove the display assembly
(4)
.
Component replacement procedures
95