HP Pavilion dv6-6000 HP Pavilion dv6 Notebook PC - Maintenance and Service Gui - Page 62
Hard drive, Remove the hard drive
View all HP Pavilion dv6-6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Hard drive NOTE: The hard drive and solid-state drive spare part kit does not include the bracket, connector cable, or screws. The bracket and screws are included in the Hard Drive Hardware Kit, spare part number 640428-001. The connector cable is included in the Cable Kit, spare part number 640422-001. Description 1-TB, 5400-rpm, 12.7 mm 750-GB, 7200-rpm, 9.5 mm 750-GB, 5400-rpm, 9.5 mm 640-GB, 7200-rpm, 9.5 mm 500-GB, 7200-rpm, 9.5 mm 320-GB, 7200-rpm, 7.0 mm 250-GB, 7200-rpm, 7.0 mm 160-GB solid-state drive (for use only with computer models equipped with an Intel processor) Spare part number 638974-001 633252-001 634250-001 621046-001 608218-001 641672-001 and 634862-001 635225-001 and 634861-001 641825-001 Before removing the hard drive, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 50). 5. Remove the service cover (see Optical drive on page 51). Remove the hard drive: 1. Disconnect the hard drive connector cable (1) from the system board. 2. Remove the four Phillips PM2.5×4.0 screws (2) that secure the hard drive to the computer. 54 Chapter 4 Removal and replacement procedures