HP Pavilion dv6-6000 HP Pavilion dv6 Notebook PC - Maintenance and Service Gui - Page 89

Remove the Phillips PM2.5×4.0 screw, Remove the system board

Get HP Pavilion dv6-6000 PDF manuals and user guides View all HP Pavilion dv6-6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 89 highlights

7. Remove the Phillips PM2.5×4.0 screw (1) and the two Phillips PM2.5×5.0 screws (2) that secure the system board to the base enclosure. 8. Flex the left side of the base enclosure (1) outward to provide clearance for the audio connectors (2) and the other connectors on the left side of the system board. 9. Lift the front edge of the system board (3) until it rests at an angle. 10. Remove the system board (4) by sliding it up and forward at an angle. Reverse this procedure to install the system board. Component replacement procedures 81

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
7.
Remove the Phillips PM2.5×4.0 screw
(1)
and the two Phillips PM2.5×5.0 screws
(2)
that secure
the system board to the base enclosure.
8.
Flex the left side of the base enclosure
(1)
outward to provide clearance for the audio
connectors
(2)
and the other connectors on the left side of the system board.
9.
Lift the front edge of the system board
(3)
until it rests at an angle.
10.
Remove the system board
(4)
by sliding it up and forward at an angle.
Reverse this procedure to install the system board.
Component replacement procedures
81