HP Pavilion dv7-7100 HP Pavilion g6 Notebook PC - Maintenance and Service Guid - Page 66

as far as the webcam/microphone, If it is necessary to replace the webcam/microphone module

Get HP Pavilion dv7-7100 PDF manuals and user guides View all HP Pavilion dv7-7100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 66 highlights

5. If it is necessary to replace the display bezel or any of the display assembly subcomponents: a. Remove the plastic screw covers (1) and the two PM 2.5 × 3.5 screws (2) that secure the display bezel to the display assembly. b. Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure. c. Remove the display bezel (4). 6. If it is necessary to replace the webcam/microphone module: a. Detach and release the webcam/microphone module (1) as far as the webcam/microphone module cable allows. (The webcam/microphone module is attached to the display enclosure with double-sided tape.) b. Disconnect the webcam/microphone cable (2) from the webcam/microphone module. 58 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
5.
If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.
Remove the plastic screw covers
(1)
and the two PM 2.5 × 3.5 screws
(2)
that secure
the display bezel to the display assembly.
b.
Flex the inside edges of the top edge
(1)
, the left and right sides
(2)
, and the bottom
edge
(3)
of the display bezel until the bezel disengages from the display enclosure.
c.
Remove the display bezel
(4)
.
6.
If it is necessary to replace the webcam/microphone module:
a.
Detach and release the webcam/microphone module
(1)
as far as the webcam/microphone
module cable allows. (The webcam/microphone module is attached to the display
enclosure with double-sided tape.)
b.
Disconnect the webcam/microphone cable
(2)
from the webcam/microphone module.
58
Chapter 4
Removal and replacement procedures