HP ProBook 5220m HP ProBook 5220m Notebook PC - Maintenance and Service Guide - Page 57

Remove the two PM3.0×3.5 hard drive bracket screws

Get HP ProBook 5220m - Notebook PC PDF manuals and user guides View all HP ProBook 5220m manuals
Add to My Manuals
Save this manual to your list of manuals

Page 57 highlights

4. Remove the battery (see Battery on page 40). 5. Remove the service access door (see WLAN module on page 42). Remove the hard drive: 1. Position the computer upside down with the front toward you. 2. Disconnect the hard drive connector cable (1). 3. Remove the two PM2.0x3.0 screws (2) and loosen the PM2.5×10.0 captive screw (3) that secures the hard drive to the computer. 4. Grasp the Mylar tab (4) on the hard drive and lift the hard drive out of the hard drive bay. 5. If it is necessary to replace the hard drive bracket, follow these steps: a. Remove the two PM3.0×3.5 hard drive bracket screws (1) from each side of the hard drive. b. Lift the bracket (2) straight up to remove it from the hard drive. Component replacement procedures 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
4.
Remove the battery (see
Battery
on page
40
).
5.
Remove the service access door (see
WLAN module
on page
42
).
Remove the hard drive:
1.
Position the computer upside down with the front toward you.
2.
Disconnect the hard drive connector cable
(1)
.
3.
Remove the two PM2.0x3.0 screws
(2)
and loosen the PM2.5×10.0 captive screw
(3)
that secures
the hard drive to the computer.
4.
Grasp the Mylar tab
(4)
on the hard drive and lift the hard drive out of the hard drive bay.
5.
If it is necessary to replace the hard drive bracket, follow these steps:
a.
Remove the two PM3.0×3.5 hard drive bracket screws
(1)
from each side of the hard drive.
b.
Lift the bracket
(2)
straight up to remove it from the hard drive.
Component replacement procedures
49