HP ProBook 5220m HP ProBook 5220m Notebook PC - Maintenance and Service Guide - Page 69
Flex the bottom, of the bezel until it disengages
View all HP ProBook 5220m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
4. If it is necessary to replace the display bezel, display enclosure, or display hinges, remove the four Mylar screw covers (1) and the four PM2.5×5.0 screws (2) that secure the display bezel to the display assembly. The screw covers are available in the Rubber Kit, spare part number 610829-001. 5. Remove the bezel: a. Flex the top (1) of the bezel from the inside edge until it disengages from the display back cover. b. Flex the inside edge of the left side and the right side (2) of the bezel until it disengages from the display back cover. c. Flex the bottom (3) of the bezel from the inside edge until it disengages from the display back cover. d. Remove the display bezel from the display back cover (4). NOTE: While removing the display bezel, gently remove the double-sided tape that attaches the bezel to the display panel. Component replacement procedures 61