HP ProBook 5220m HP ProBook 5220m Notebook PC - Maintenance and Service Guide - Page 72

cover, and then route the cables through the clips, from the adhesive on the back

Page 72 highlights

12. Gently pull the integrated microphone (1) from the clips at the top of the display back cover, remove the display cable from the clips and routing channels (2) along the bottom of the display back cover, and then remove the display cable (3). 13. If it is necessary to remove the wireless antennas and cables: a. Detach the WLAN antennas and the WWAN antennas (1) from the adhesive on the back cover, and then route the cables through the clips (2) that secure the antenna cables to the display back cover. b. Remove the wireless antennas and cables. Reverse this procedure to reassemble and install the display assembly. 64 Chapter 4 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147

12.
Gently pull the integrated microphone
(1)
from the clips at the top of the display back cover, remove
the display cable from the clips and routing channels
(2)
along the bottom of the display back cover,
and then remove the display cable
(3)
.
13.
If it is necessary to remove the wireless antennas and cables:
a.
Detach the WLAN antennas and the WWAN antennas
(1)
from the adhesive on the back
cover, and then route the cables through the clips
(2)
that secure the antenna cables to the
display back cover.
b.
Remove the wireless antennas and cables.
Reverse this procedure to reassemble and install the display assembly.
64
Chapter 4
Removal and replacement procedures