HP ProBook 5220m HP ProBook 5220m Notebook PC - Maintenance and Service Guide - Page 65
TouchPad cable, Fingerprint reader cable
View all HP ProBook 5220m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
2. Remove the four PM2.5x5.0 screws along the front edge. 3. Position the computer right-side up with the front toward you, and open the display as far as possible. 4. Release and disconnect the following zero insertion force (ZIF) connector cables from the system board: a. Power cable (1) b. TouchPad cable (2) c. Fingerprint reader cable (3) 5. Remove the WLAN cables (4) from the routing channel. Component replacement procedures 57
2.
Remove the four PM2.5x5.0 screws along the front edge.
3.
Position the computer right-side up with the front toward you, and open the display as far as
possible.
4.
Release and disconnect the following zero insertion force (ZIF) connector cables from the system
board:
a.
Power cable
(1)
b.
TouchPad cable
(2)
c.
Fingerprint reader cable
(3)
5.
Remove the WLAN cables
(4)
from the routing channel.
Component replacement procedures
57