HP ProBook 5220m HP ProBook 5220m Notebook PC - Maintenance and Service Guide - Page 59
Switch cover, inside the battery bay.
View all HP ProBook 5220m manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Switch cover Description Switch cover Spare part number 610832-001 Before removing the switch cover, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the battery (see Battery on page 40). Remove the switch cover: 1. Position the computer upside down with the battery bay toward you. 2. Remove the three PM2.0x2.5 screws (1) inside the battery bay. 3. Remove the two PM2.5x6.5 screws (2) located outside the battery bay. 4. Position the computer right-side up with the front toward you, and open the computer. 5. Using a flat-bladed screwdriver, pry up the front edge of the switch cover from the keyboard. Component replacement procedures 51