HP ProLiant BL660c Electrical signal integrity considerations for HP BladeSyst - Page 14
of a board for more than two inches of cumulative distance. The length of trace segments that are
View all HP ProLiant BL660c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
of a board for more than two inches of cumulative distance. The length of trace segments that are parallel to the edge of a board should be minimized as much as possible. Traces should be at an angle of at least 10º to a board edge. This is to reduce the effects of PCB fiber weave on board impedance and propagation velocity on differential traces (see Figure 13). Figure 13. Zig-Zag routing example 14
of a board for more than two inches of cumulative distance. The length of trace segments that are
parallel to the edge of a board should be minimized as much as possible. Traces should be at an
angle of at least 10ยบ to a board edge. This is to reduce the effects of PCB fiber weave on board
impedance and propagation velocity on differential traces (see Figure 13).
Figure 13.
Zig-Zag routing example
14