HP StorageWorks 2/24 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Env - Page 130

Planning Considerations for Fibre Channel Topologies 3 Figure 3-18 illustrates port numbering and logical port addressing for Intrepid 6140 Director ports accessed from the rear. UPM Cards 34 143 142 141 140 8F 8E 8D 8C 93 92 91 90 32 135 134 133 132 87 86 85 84 8B 8A 89 88 UPM Cards 33 136 137 138 139 88 89 8A 8B 8C 8D 8E 8F SBAR - 1 Module SBAR - 0 Module Figure 3-18 Intrepid 6140 Port Numbers and Logical Port Addresses (Rear) The figure shows: • SBAR positions (0 and 1). • UPM card numbers (numerical 32, 33, and 34). • Numerical physical port numbers in blue (132 through 143). Port numbers 128 through 131 are embedded and not addressable. • Hexadecimal physical port numbers in red (84 through 8F). Port numbers 80 through 83 are embedded and not addressable. • Logical port addresses in bold (hexadecimal 88 through 93). Port addresses 84 through 87 are not addressable. Although Figure 3-17 and Figure 3-18 depict UPM card maps only for the Intrepid 6140 Director, physical port numbers and logical port addresses can be extrapolated for the Intrepid 6064 Director (64 ports), Sphereon 3232 Fabric Switch (32 ports), Sphereon 4300 Fabric Switch (12 ports), and Sphereon 4500 Fabric Switch (24 ports). Management Limitations The following considerations must be given to the limitations and interactions of director or fabric switch management when using open systems (FCP) or FICON management style: 3-44 McDATA Products in a SAN Environment - Planning Manual