HP StorageWorks 2/24 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Env - Page 258

Configuration Planning Tasks 6 - 10/100 Base-T Ethernet management port addresses: • Default IP address is 192.168.100.100. • Subnet mask is 255.255.255.0. • Gateway address is 0.0.0.0. - Intelligent port (13 through 16) addresses: • Default IP address is 0.0.0.0. • Subnet mask is 0.0.0.0. • External IP address is 0.0.0.0. • Internal IP address is 0.0.0.0. Task 7: Plan SNMP Support (Optional) As an option, network administrators can use the SAN management application to configure an SNMP agent that runs on the management server. This agent is used to: • Configure up to 12 authorized management workstations to receive unsolicited SNMP trap messages (directors and fabric switches). • Configure up to eight authorized management workstations to send SNMP trap messages (SAN routers). Administrators can also use the Element Manager application to configure an SNMP agent that runs on each director, fabric switch, or SAN router. This agent can be configured to send generic SNMP trap messages. Trap recipients can also access SNMP management information and may be granted permission to modify SNMP variables as follows: • Assign and record product names, contact persons, descriptions, and locations to configure the products for SNMP management station access. • Plan access to the managed product LAN segment. This segment must connect to the LAN on which SNMP management workstations are installed. • Obtain IP addresses and SNMP community names for management workstations that have access to products. 6-10 McDATA Products in a SAN Environment - Planning Manual