HP StorageWorks 2/24 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Env - Page 175
Every initiator-to-target device pair in
View all HP StorageWorks 2/24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Implementing SAN Internetworking Solutions 4 7. Use redundant mFCP connections - For high availability (not increased bandwidth), use multiple mFCP connections between SAN routers to ensure the mSAN does not partition and connectivity to routing domains 30 and 31 remains intact. 8. Assign common-numbered mFCP port pairs - Although any FCP port can be paired with any FCP port on another SAN router, for simplified tracking it is good practice (where possible) to assign identical port numbers to both connections of a high-availability mFCP link. For example, connect port 5 of SAN router A to port 5 of SAN router B. 9. Assign common-numbered iFCP port pairs - Although any local intelligent port can be paired with any remote intelligent port, for simplified tracking it is good practice (where possible) to assign identical port numbers to both connections of an iFCP link. For example, connect port 14 of SAN router A to port 14 of SAN router B. 10. Track iFCP sessions - Every initiator-to-target device pair in a merged zone is assigned an iFCP session. Be aware of the number of active iFCP sessions. If approaching the per-port limit (64 sessions) un-export zones without active storage traffic to free up sessions. 11. Document zones and iFCP links for each mSAN - Use the following pair of example forms to track zone and iFCP link information. For an initial configuration, transfer values from the forms to the routed network using the SANvergence Manager Element Manager applications. For sustaining maintenance, copy information from the SAN management applications (through printable HTML reports) to the forms for consistency checks and archival. Implementing SAN Internetworking Solutions 4-31