HP StorageWorks 2/24 FW 07.00.00/HAFM SW 08.06.00 McDATA Products in a SAN Env - Page 256

Configuration Planning Tasks 6 • If installing products and the management server on a public LAN containing other devices, default network addresses may require change to avoid address conflicts with existing devices. For Intrepid-series directors, Sphereon-series fabric switches, and Eclipse-series SAN routers, the IP address, gateway address, and subnet mask are changed through a remote terminal connected to the product's maintenance port. For the management server, these addresses are changed through the liquid crystal display (LCD) front panel. In addition, assign and record a unique domain name system (DNS) name for the management server and each director or switch. • Gateway addresses may need to be configured for managed products and the management server if these devices connect to the LAN through a router or other gateway device. The Ethernet connections for the 1U management server, directors, fabric switches, and SAN routers have the following default network addresses: • 1U Management server: - Media access control (MAC) address is unique for each server and managed product. The address is in xx.xx.xx.xx.xx.xx format, where each xx is a hexadecimal pair. - IP address of the private LAN connection (LAN 2) is 10.1.1.1. - IP address of the public LAN connection (LAN 1) is 192.168.0.1. - Subnet mask is 255.0.0.0. - Gateway address is blank. • Intrepid-series directors and Sphereon-series fabric switches: - MAC address is unique for each product. - Default IP address is 10.1.1.10. - Subnet mask is 255.0.0.0. - Gateway address is 0.0.0.0. 6-8 McDATA Products in a SAN Environment - Planning Manual