HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 150
defZoneDelete, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. defZoneDelete defZoneDelete Deletes the default zone configuration. Synopsis defzonedelete Description Use this command to delete the default zone configuration. This command changes the defined configuration. This command deletes the cfg "d_efault_Cfg" that contains the zone "d_efault_Zone" that in turn contains the zone member "00:00:00:00:00:00:00:00". If "d_efault_Cfg" is the effective zone configuration, this command executes cfgDisable; otherwise, it executes cfgSave. Also, this command deletes the alias "d_efault_Zone_Alias" that has the member "1,0". Note This command requires a Brocade Advanced Zoning license. When security is enabled, this command can be issued only from the primary FCS switch. Names with the "d_efault" prefix are reserved for default zoning use. If "d_efault_Cfg" is the effective zone configuration, then both cfgShow and cfgActvShow will display "DefaultZone" as the effective zone configuration. Operands Examples None To delete a default zone configuration: switch:admin> cfgactvshow Effective configuration: no configuration in effect switch:admin> defzonedelete switch:admin> cfgactvshow See Also defZoneCreate 2-116 Fabric OS Command Reference Manual Publication Number: 53-1000240-01