HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 698
switchBeacon, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 698 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. switchBeacon switchBeacon Sets switch beaconing mode on or off. Synopsis switchbeacon [mode] Description Use this command to enable or disable switch beaconing mode. When beaconing mode is turned on, the port LEDs flash amber, left to right and right to left, from port 0 to the highest port number and back to port 0. The beaconing mode continues until you turn it off. This can be used to beckon to locate a failing unit, for example. Beaconing mode affects only the port LEDs. Other commands are still executable and functional. The normal flashing LED pattern (associated with an active, faulty, or disabled port) is suppressed and the beaconing pattern is shown. However, if diagnostic frame-based tests (portLoopbackTest, crossPortTest, and spinSilk) are executed, two patterns are interleaved. The diagnostic test flickers the LEDs green and simultaneously the beaconing mode runs the LEDs amber. Use the switchShow command to display the status of beaconing. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operand: mode Specify 1 to enable beacon mode or 0 to disable beacon mode. This operand is optional. If no operand is specified, the current value is displayed. To turn beaconing mode on: switch:admin> switchbeacon 1 To turn beaconing mode off: switch:admin> switchbeacon 0 See Also switchShow 2-664 Fabric OS Command Reference Manual Publication Number: 53-1000240-01