HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 503
portCmd, Examples, See Also, To verify if packets can be sent to the destination IP address
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 503 highlights
Note: Enter commands in lowercase only; mixed case is for readability. portCmd 2 Examples interface. This operand is optional. To verify if packets can be sent to the destination IP address: switch:admin> portcmd ping 4/ge0 -s 192.168.100.50 -d 192.168.100.40 Pinging 192.168.100.40 from ip interface 192.168.100.50 on 0/0 with 40 bytes of data Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64 Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64 Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64 Reply from 192.168.100.40: bytes=40 rtt=0ms ttl=64 Ping Statistics for 192.168.100.40: Packets: Sent = 4, Received = 4, Loss = 0 (0 loss) Min RTT = 0ms, Max RTT = 0ms Average = 0ms To set the path characteristic to source mode on the remote host: switch:admin> portcmd ipperf 4/ge0 -s 192.168.100.50 -d 192.168.100.40 -S ipperf to 192.168.100.40 from IP interface 192.168.100.50 on 4/0:3227 30s: BW:115.67MBps WBW(30s): 56.70MBps Loss(%):0.0 Delay(ms):2 PMTU:1500 See Also portCfg, portShow Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-469