HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 486
portCfgLPort, Synopsis, Description, Operands
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 486 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. portCfgLPort portCfgLPort Configures a port as an L_Port. Synopsis portcfglport [slotnumber/]portnumber locked_mode [private_mode] [duplex_mode] Description Use this command to designate a port as an L_Port. The switch then only attempts to initialize that port as an FL_Port. By default, the L_Port is a public L_Port. It could be set to private L_Port and the FLOGI will be rejected. This configuration can be cleared but not set on VE/VEX_Ports. The switch never attempts point-to-point (F_Port) initialization on the port. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands The operands are as follows: slotnumber For bladed systems only, specify the slot number of the port to be configured, followed by a slash (/). portnumber Specify a port number to be configured, relative to its slot for bladed systems. Use switchShow to display a list of valid ports. This operand is optional; if omitted, this command displays the L_Port conditions for all ports. locked_mode Specify 1 to configure the specified port as a locked L_Port. Specify 0 to deconfigure the specified port from its previous role as a locked L_Port. This operand is required if portnumber is specified. private_mode Specify 1 to configure the L_Port as a private L_Port. Specify 0 to configure the L_Port as a normal public L_Port. This operand is optional; if omitted; the default value of 0 is used. Private devices are supported only on SilkWorm 3250, 3850, and 3900 and directors with FC2-16 and FC2-16 blades. For other switches and blade types, option 1 is blocked. duplex_mode Specify 2 to configure the specified port as a full-duplex L_Port with fairness. Specify 1 to configure the L_Port as a half-duplex L_Port with fairness. Specify 0 to configure the L_Port as a full-duplex L_Port. This operand is optional; if omitted, the default value of 0 is used. If used without operands, this command reports the L_Port conditions for all ports present. 2-452 Fabric OS Command Reference Manual Publication Number: 53-1000240-01