Home » HP Manuals » Storage Devices » HP StorageWorks 2/32 » Manual Viewer

HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 323

interopMode, Port number zoning, Node WWN zoning, QuickLoop zoning, Virtual Channel encoded

View all HP StorageWorks 2/32 manuals

Add to My Manuals
Save this manual to your list of manuals

Page 323 highlights

Note: Enter commands in lowercase only; mixed case is for readability. interopMode 2 interopMode Enables or disables Brocade switch interoperability with switches from other manufacturers. Synopsis interopmode [mode] Description Use this command to enable or disable interoperability mode for individual Brocade switches. This feature enables other manufacturers' switches to be used in a Brocade fabric. This command must be executed on all Brocade switches in the fabric. Each switch must then be rebooted for this change to take effect. When running in interop mode, several Brocade features are not available in order to provide maximum compatibility between switches. Configured Domain IDs for Brocade switches must be between 97 and 127 for successful connection to other switches. The firmware automatically assigns valid Domain IDs when interoperability mode is enabled. Before enabling interoperability mode, inspect the individual switches and the zoning database for compatibility, disable any features not supported in interoperability mode, and disable the Platform Management functions using msPlMgmtDeactivate. When the switch is running in interoperability mode, the following parameters cannot be changed using configure: Port number zoning, Node WWN zoning, QuickLoop zoning, Virtual Channel encoded address, and Secure Fabric OS. When interoperability mode is disabled, configuration parameters are returned to their default states and can be changed using configure. Note Only Port World Wide Name zoning is supported in interoperability mode. Note FC Routing services are not available in interop mode. Switches connected to edge fabrics are not available in interop mode. Note When security is enabled, this command can be issued only from the primary FCS switch. Note You must reboot the switch for the change to take effect. Operands This command has the following operand: mode Specify 1 to enable interoperability mode; specify 0 to disable interoperability mode. This operand is optional; if omitted, this command displays the current value. Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-289

Section	Page
Contents	5
About This Document	5
Chapter 1 Using Fabric OS Commands	5
Chapter 2 Fabric OS Commands	5
Chapter 3 Licensed Product Commands	19
Chapter 4 Exclusive Primary FCS Commands	19
Chapter 5 Control Processor Commands	20
Chapter 6 supportShow Reference	20
Appendix A RBAC Command Availability	20
Index	20
About This Document	21
Using Fabric OS Commands	33
Understanding Role-Based Access Control	33
Using the Command Line Interface	34
Fabric OS Commands	35
aaaConfig	36
ad	38
agshow	48
agtCfgDefault	50
agtCfgSet	53
agtCfgShow	56
aliAdd	59
aliCreate	60
aliDelete	61
aliRemove	62
aliShow	63
aptPolicy	64
auditCfg	66
authUtil	67
backplaneTest	69
backport	71
bannerSet	73
bannerShow	74
bcastShow	75
bladeBeacon	76
bladeDisable	77
bladeEnable	78
burninErrClear	80
burninErrShow	81
burninLevel	82
burninStatus	83
camTest	84
centralMemoryTest	86
cfgActvShow	90
cfgAdd	91
cfgClear	92
cfgCreate	93
cfgDelete	94
cfgDisable	95
cfgEnable	96
cfgRemove	97
cfgSave	98
cfgShow	99
cfgSize	102
cfgTransAbort	104
cfgTransShow	105
chassisConfig	106
chassisName	109
chassisShow	110
chipRegShow	113
cmemRetentionTest	114
cmiTest	116
configDefault	118
configDownload	120
configShow	124
configUpload	127
configure	130
crossPortTest	139
dataTypeShow	142
date	143
dbgShow	145
defZone	146
defZoneCreate	148
defZoneDelete	150
diagClearError	151
diagCommandShow	152
diagDisablePost	153
diagEnablePost	154
diagEnv	155
diagFailLimit	157
diagHelp	158
diagLoopId	159
diagModeShow	160
diagPost	161
diagRetry	162
diagSetBurnin	163
diagSetCycle	164
diagShow	165
diagShowTime	166
diagSkipTests	167
diagStatus	168
diagStopBurnin	169
distribute	170
dlsReset	171
dlsSet	172
dlsShow	173
dnsConfig	174
enclosureShow	175
errClear	177
errDelimiterSet	178
errDump	179
errFilterSet	180
errModuleShow	181
errShow	182
exit	184
fabPortShow	185
fabRetryShow	188
fabricLog	189
fabricPrincipal	191
fabricShow	192
fabStateClear	194
fabStateResize	195
fabStateShow	196
fabStatsShow	197
fabSwitchShow	199
fanDisable	201
fanEnable	202
fanShow	203
fastboot	204
fazoneAdd	205
fazoneCreate	206
fazoneDelete	208
fazoneRemove	209
fazoneShow	210
fcipChipTest	211
fcipPathTest	213
fcLunQuery	215
fcPing	216
fcpLogClear	218
fcpLogDisable	219
fcpLogEnable	220
fcpLogShow	221
fcpProbeShow	222
fcpRlsShow	223
fcrChipTest	224
fcrConfigure	226
fcrDisable	227
fcrEnable	228
fcrFabricShow	229
fcrPathTest	230
fcrPhyDevShow	232
fcrProxyConfig	234
fcrProxyDevShow	236
fcrResourceShow	238
fcrRouterPortCost	240
fcrRouteShow	242
fcrXlateConfig	243
fddCfg	245
fdmiCacheShow	247
fdmiShow	248
ficonClear	249
ficoncupset	250
ficoncupshow	251
ficonHelp	252
ficonShow	253
filterTest	259
firmwareCommit	261
firmwareDownload	262
firmwareDownloadStatus	266
firmwareRestore	268
firmwareShow	269
fportTest	270
fosConfig	273
fruReplace	275
fspfShow	276
fwAlarmsFilterSet	278
fwAlarmsFilterShow	279
fwClassInit	280
fwConfigReload	281
fwConfigure	282
fwFruCfg	285
fwHelp	286
fwMailCfg	287
fwPortDetailShow	289
fwSamShow	291
fwSet	292
fwSetToCustom	293
fwSetToDefault	294
fwShow	295
h	298
haDisable	299
haDump	300
haEnable	302
haFailover	303
haShow	304
haSyncStart	306
haSyncStop	307
help	308
historyLastShow	309
historyMode	310
historyShow	311
httpCfgShow	313
i	314
ifModeSet	316
ifModeShow	318
interfaceShow	319
interopMode	323
iodReset	326
iodSet	327
iodShow	328
ipAddrSet	329
ipAddrShow	331
iscsiCfg	332
iscsiChipTest	340
iscsiHelp	341
iscsiPathTest	342
iscsiPortCfg	343
iscsiSessionCfg	346
iscsiTargetName	349
islShow	350
isnscCfg	351
itemList	353
killTelnet	355
licenseAdd	357
licenseHelp	358
licenseIdShow	359
licenseRemove	360
licenseShow	361
linkCost	362
login	364
logout	365
loopPortTest	366
lsanZoneShow	368
lsDbShow	370
memShow	373
miniCycle	374
minisPropShow	379
msCapabilityShow	380
msConfigure	381
msPlatShow	383
msPlatShowDBCB	384
msPlClearDB	385
msPlMgmtActivate	386
msPlMgmtDeactivate	387
msTdDisable	388
msTdEnable	389
msTdReadConfig	390
myId	391
nbrStateShow	392
nbrStatsClear	393
nodeFind	395
nsAliasShow	398
nsAllShow	402
nscamShow	403
nsShow	405
nsZoneMember	409
passwd	412
passwdCfg	415
pathInfo	419
pdShow	423
perfAddEEMonitor	424
perfAddIPMonitor	426
perfAddReadMonitor	427
perfAddRWMonitor	428
perfAddSCSIMonitor	429
perfAddUserMonitor	430
perfAddWriteMonitor	432
perfCfgClear	433
perfCfgRestore	434
perfCfgSave	435
perfClearAlpaCrc	436
perfClearEEMonitor	437
perfClearFilterMonitor	438
perfDelEEMonitor	439
perfDelFilterMonitor	440
perfHelp	441
perfMonitorClear	442
perfMonitorShow	444
perfSetPortEEMask	448
perfShowAlpaCrc	450
perfShowEEMonitor	451
perfShowFilterMonitor	453
perfShowPortEEMask	455
pkiCreate	457
pkiRemove	458
pkiShow	459
policy	460
portAlpaShow	463
portBufferShow	464
portCamShow	467
portCfg	470
portCfgDefault	476
portCfgEPort	477
portCfgEXPort	478
portCfgGPort	480
portCfgISLMode	481
portCfgLongDistance	483
portCfgLPort	486
portCfgNPIVPort	488
portCfgPersistentDisable	490
portCfgPersistentEnable	491
portCfgShow	492
portCfgSpeed	496
portCfgTrunkPort	497
portCfgVEXPort	498
portCmd	500
portDebug	504
portDisable	505
portEnable	506
portErrShow	507
portFlagsShow	509
portLedTest	511
portLogClear	512
portLogConfigShow	513
portLogDisable	514
portLogDump	515
portLogDumpPort	517
portLogEnable	518
portLogEventShow	519
portLoginShow	522
portLogPdisc	523
portLogReset	524
portLogResize	525
portLogShow	526
portLogShowPort	531
portLogTypeDisable	532
portLogTypeEnable	533
portLoopbackTest	534
portMirror	537
portName	540
portPerfShow	541
portRegTest	542
portRouteShow	544
portShow	546
portStats64Show	555
portStatsClear	558
portStatsShow	559
portSwap	563
portSwapDisable	564
portSwapEnable	565
portSwapShow	566
portTest	567
portTestShow	569
portZoneShow	571
powerOffListSet	572
powerOffListShow	574
psShow	575
quietMode	576
reboot	577
routeHelp	578
saveCore	579
secActiveSize	583
secAuthSecret	584
secCertUtil	586
secDefineSize	590
secFabricShow	591
secFCSFailover	592
secGlobalShow	593
secHelp	595
secModeDisable	596
secModeEnable	597
secModeShow	602
secNonFCSPasswd	603
secPolicyAbort	604
secPolicyActivate	605
secPolicyAdd	606
secPolicyCreate	609
secPolicyDelete	613
secPolicyDump	615
secPolicyFCSMove	617
secPolicyRemove	618
secPolicySave	621
secPolicyShow	622
secStatsReset	624
secStatsShow	626
secTempPasswdReset	628
secTempPasswdSet	629
secTransAbort	630
secVersionReset	631
sensorShow	632
setDbg	633
setEsdMode	634
setGbicMode	635
setMediaMode	636
setModem	637
setSfpMode	639
setSplbMode	640
setVerbose	641
sfpShow	642
shellFlowControlDisable	646
shellFlowControlEnable	647
slotOff	648
slotOn	649
slotPowerOff	650
slotPowerOn	651
slotShow	652
slTest	654
snmpConfig	656
snmpMibCapSet	663
snmpMibCapShow	665
spinFab	667
spinJitter	669
spinSilk	672
sramRetentionTest	677
statsClear	679
statsTest	680
stopPortTest	682
supportFfdc	683
supportFtp	684
supportSave	686
supportShow	689
supportShowCfgDisable	695
supportShowCfgEnable	696
supportShowCfgShow	697
switchBeacon	698
switchCfgPersistentDisable	699
switchCfgPersistentEnable	700
switchCfgSpeed	701
switchCfgTrunk	702
switchDisable	703
switchEnable	704
switchName	705
switchReboot	706
switchShow	707
switchShutdown	713
switchStart	714
switchStatusPolicySet	715
switchStatusPolicyShow	717
switchStatusShow	719
switchUptime	721
syslogdFacility	722
syslogdIpAdd	723
syslogdIpRemove	724
syslogdIpShow	725
sysShutdown	726
systemVerification	728
tempShow	730
timeout	731
topologyShow	732
traceDump	734
traceFtp	735
trackChangesHelp	737
trackChangesSet	738
trackChangesShow	739
trunkDebug	740
trunkShow	741
tsClockServer	743
tsTimeZone	745
turboRamTest	748
txdPath	749
upTime	752
uRouteConfig	753
uRouteRemove	755
uRouteShow	756
userConfig	758
userRename	762
version	763
wwn	764
zone	765
zoneAdd	768
zoneCreate	769
zoneDelete	771
zoneHelp	772
zoneObjectCopy	773
zoneObjectExpunge	774
zoneObjectRename	775
zoneRemove	776
zoneShow	777
Licensed Product Commands	779
Advanced Zoning Commands	779
Fabric Assist Mode Commands	780
Extended Fabrics Command	781
Fabric Watch Commands	781
ISL Trunking Commands	782
Advanced Performance Monitoring Commands	782
Secure Fabric OS Commands	784
Exclusive Primary FCS Commands	787
Commands Exclusive to the Primary FCS	787
Control Processor Commands	791
Commands Supported on the Standby CP	791
supportShow Reference	793
supportShow Control Commands	793
supportShow Command Groups	794
Proc Entry Information Displayed	796
RBAC Command Availability	801
Index	817
Numerics	817
A	817
B	818
C	818
D	818
E	819
F	819
G	820
H	820
I	820
J	820
L	820
M	821
N	821
P	821
Q	822
R	822
S	822
T	823
U	823
V	823
W	824

Match case Limit results 1 per page

Fabric OS Command Reference Manual

2-289

Publication Number: 53-1000240-01

interopMode

Note: Enter commands in lowercase only; mixed case is for readability.

interopMode

Enables or disables Brocade switch interoperability with switches from other manufacturers.

Synopsis

interopmode

[

mode

]

Description

Use this command to enable or disable interoperability mode for individual Brocade switches. This

feature enables other manufacturers’ switches to be used in a Brocade fabric.

This command must be executed on all Brocade switches in the fabric. Each switch must then be

rebooted for this change to take effect. When running in interop mode, several Brocade features are not

available in order to provide maximum compatibility between switches.

Configured Domain IDs for Brocade switches must be between 97 and 127 for successful connection to

other switches. The firmware automatically assigns valid Domain IDs when interoperability mode is

enabled.

Before enabling interoperability mode, inspect the individual switches and the zoning database for

compatibility, disable any features not supported in interoperability mode, and disable the Platform

Management functions using

msPlMgmtDeactivate

When the switch is running in interoperability mode, the following parameters cannot be changed using

configure

: Port number zoning, Node WWN zoning, QuickLoop zoning, Virtual Channel encoded

address, and Secure Fabric OS.

When interoperability mode is disabled, configuration parameters are returned to their default states and

can be changed using

configure

Note

Only Port World Wide Name zoning is supported in interoperability mode.

Note

FC Routing services are not available in interop mode. Switches connected to edge fabrics are not

available in interop mode.

Note

When security is enabled, this command can be issued only from the primary FCS switch.

Note

You must reboot the switch for the change to take effect.

Operands

This command has the following operand:

mode

Specify 1 to enable interoperability mode; specify 0 to disable interoperability

mode. This operand is optional; if omitted, this command displays the current

value.