HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 256

2 Note: Enter commands in lowercase only; mixed case is for readability. ficonShow • Protocol Displays whether the traffic is using FICON or FCP. Registered Node WWN Displays the device's node World Wide Name associated with the device HBA. Registered Port WWN Displays the device's channel or storage CU port World Wide Name associated with the device HBA. Sequence Number Displays the sequence number of the self describing node. Serial Number Displays the switch serial number. Switch node WWN Displays the switch node World Wide Name. Switch Port WWN Displays the switch port World Wide Name. Switch WWN Displays the switch WWN. Tag Displays the physical identifier for the self-describing node interface. TS Format Displays the Time Server format. Time Stamp Displays the timestamp, expressed in date format. Type Same as Port Type. Type Number Displays the type number of the self describing node. It also describes the machine type. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following operands: database Specify the database to display. Valid values are: • RNID • LIRR • SwitchRNID • RLIR • ILIR This operand is required. fabric Specify fabric to display both local and remote information; if omitted, only members of the named database that are local to the switch on which the command is issued displays. 2-222 Fabric OS Command Reference Manual Publication Number: 53-1000240-01