HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 36
aaaConfig, Note: Enter commands in lowercase only; mixed case is for readability.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. aaaConfig aaaConfig Manages RADIUS configuration information. Synopsis aaaconfig [action][options] Description Use this command to manage the RADIUS configuration for the authentication, authorization and accounting (AAA) services. Use this command to display, add, remove, change, enable or disable RADIUS configuration. When the command completes, any new configuration is saved persistently. It is effective for the next AAA request. The configuration applies to all switch instances in a platform supporting multiple switch domains. Customers can use centralized RADIUS servers to manage AAA services for a switch, as defined in RFC 2865. When server is a required operand, it must be either an IP address or a name in dot notation. If a name is used, DNS must be properly configured Note This command can be executed when logged in via console, telnet or SSH connection. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands This command has the following actions and associated options: --show Displays the current AAA service configuration. --add server [-p port][-s secret][-t timeout][-a chap | pap] Add the specified server to the end of RADIUS configuration list, with port as the RADIUS server port number, secret as the shared secret between the switch and the RADIUS server, timeout as the response timeout for the RADIUS server, and PAP or CHAP as the authentication protocol to be used. The server must be different from the ones in the existing configuration. --remove server Remove the specified server from the RADIUS configuration list. server must match one in the existing configuration. To remove the last server, you must disable RADIUS configuration first. --change server [-p port][-s secret][-t timeout][-a chap | pap] Change parameters for the specified server in the existing RADIUS configuration list, with port as the RADIUS server port number, secret as the shared secret between the switch and the RADIUS server, timeout as the response timeout for the RADIUS server, and PAP or CHAP as the authentication protocol to be used. The server must match one in the existing configuration. --move server to_position Move the specified server in the existing RADIUS configuration list from the current position to the specified new position. This rearranges the order that the specified RADIUS server is used. --localonly Enable authentication via the switch-local database only. This is used to select the switch-local database as the primary AAA service. 2-2 Fabric OS Command Reference Manual Publication Number: 53-1000240-01