HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 683
supportFfdc, Synopsis, Description, Operands, Examples, See Also
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 683 highlights
Note: Enter commands in lowercase only; mixed case is for readability. supportFfdc 2 supportFfdc Modifies or displays first-fault data capture (FFDC) daemon. Synopsis supportffdc [--disable | --enable | --show] Description Use this command to disable or enable the FFDC events, or display the current configuration. If disabled, the daemon does not capture any data even when a message with FFDC attributes is logged. FFDC is enabled by default. Note The execution of this command is subject to Admin Domain restrictions that may be in place. Operands Examples This command has the following operands: --disable Disables the FFDC. --enable Enables the FFDC. --show Displays the FFDC configuration parameters. Without operands, the command syntax is displayed. To display the FFDC configuration: switch:admin> supportffdc --show First Failure Data Capture (FFDC) is disabled. To enable the FFDC events: switch:admin> supportffdc --enable First Failure Data Capture (FFDC) is enabled. See Also none Fabric OS Command Reference Manual Publication Number: 53-1000240-01 2-649