HP StorageWorks 2/32 Brocade Fabric OS Command Reference Manual (53-1000240-01 - Page 684
supportFtp, Displays FTP parameters.
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 684 highlights
2 Note: Enter commands in lowercase only; mixed case is for readability. supportFtp supportFtp Sets, clears, or displays support FTP parameters, or a time interval to check the FTP server. Synopsis supportftp [-S] supportftp -s [-h hostip][-u username][-p password][-d remotedirectory] supportftp -t hours supportftp -R Description Use this command to set, clear, or display support FTP parameters, or a time interval to check the FTP server. Note If there is no parameter specified, this command defaults to supportFtp -S. Operands This command has the following mutually exclusive operands: -S Displays FTP parameters. -s Sets FTP parameters. -s has the following optional operands: -h hostip Specifies FTP host IP address. It must be an IP address. hostip should be less than 48 characters. -u username Specifies FTP user name. username should be less than 48 characters. -p password Specifies FTP user password. If the user name is anonymous, the password is not needed. password should be less than 48 characters. -d remotedirectory Specifies remote directory to store trace dump files. supportFtp cannot take a slash ( / ) as a directory name. remotedirectory should be less than 48 characters. -t Sets time interval to check FTP server. -t has the following required operands: hours Checks the connectivity of FTP server at the indicated time interval (in hours). -R Clears FTP parameters. 2-650 Fabric OS Command Reference Manual Publication Number: 53-1000240-01