HP StorageWorks 4000s NAS 4000s and 9000s Installation Guide - Page 18
Preinitialization, Collect information for configuration
View all HP StorageWorks 4000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
DRAFT Preinitialization Before beginning the installation process, verify that the hardware installation is complete. Verify that the NAS device is completely installed in the rack and that all cables and cords are connected. Note: If you need assistance with rack installation or hardware connections, refer to the quick reference and rack installation guide included in the shipping carton. Collect information for configuration Choose a host name and collect general information before initializing the NAS device. Collect the general information required to initialize the NAS device for both dynamic host configuration protocols (DHCP) and non-DHCP configurations. You will be asked for this information during configuration, as shown in Table 2. Become familiar with this information before attempting to configure the NAS device. Template date: 09/2003 18 NAS 4000s and 9000s Installation Guide HP Restricted