HP StorageWorks 4000s NAS 4000s and 9000s Installation Guide - Page 21
RapidLaunch method, Requirements, Procedure
View all HP StorageWorks 4000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Template date: 09/2003 DRAFT RapidLaunch method The NAS device includes a RapidLaunch CD that can run on any Windows-based PC using Internet Explorer 5.5 (or later). Requirements The following items are required to run the WebUI configuration application: ■ Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same network segment as the NAS device ■ RapidLaunch CD Procedure To initialize the NAS device: Caution: Do not power up the NAS device until steps 1 through 5 are completed. 1. Connect the Ethernet cables to the respective network ports of the NAS device and the corresponding network segments. Note: Connect a loopback cable to any of the Ethernet ports on the NAS device that are not configured for use. 2. Verify that the Windows-based PC client is connected to the same subnet as the NAS device. 3. Power on the PC and wait until the operating system has completely loaded. 4. Insert the RapidLaunch CD into the CD-ROM drive of the PC. NAS 4000s and 9000s Installation Guide 21 HP Restricted