HP StorageWorks 4000s NAS 4000s and 9000s Installation Guide - Page 24
Remote browser method (using hostname), Requirements
View all HP StorageWorks 4000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
DRAFT Remote browser method (using hostname) The NAS device ships by default with DHCP enabled on the network port. If the system is placed on a DHCP enabled network and the serial number of the device is known, it can be accessed through a client running Internet Explorer 5.5 (or later) on that network, using the 3202 port of the device. The serial number on the NAS 4000s is located behind the front bezel as illustrated in Figure 3. The serial number on the NAS 9000s is located on the right front of the device. Template date: 09/2003 NAS 4000s D4059ABC3433 TM Figure 3: NAS 4000s serial number location Requirements The following items are required to run the WebUI configuration application: ■ Windows-based PC loaded with Internet Explorer 5.5 (or later) on the same segment as the NAS device ■ DHCP enabled network ■ Serial number of the NAS device 24 NAS 4000s and 9000s Installation Guide HP Restricted