HP StorageWorks 4000s NAS 4000s and 9000s Installation Guide - Page 45
Configuring ip address resources for the virtual server name, Finish, Cluster Resources, Bring Online
View all HP StorageWorks 4000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Template date: 09/2003 DRAFT 6. Select the possible owners and select Next to continue. 7. Specify the dependencies for the ip address resource. The physical disk should always be selected as a dependency. 8. Select Next to continue. Note: The physical disk resource specified in this step must reside in the same cluster group as specified in the beginning of this wizard 9. Specify the ip address, netmask, and the network the ip address is to reside on and select Next to continue. 10. Review the configuration and select Finish to create the ip address for the cluster group. 11. Once the resource is created it is necessary to bring it online. In the Cluster Resources page, select the resource and select Bring Online. 12. Select OK on the Bring a Resource Online page to bring the new ip address resource online. Configuring ip address resources for the virtual server name To configure an ip address resource follow the procedure listed below. 1. Open the WEBUI select the Cluster tab and then Cluster Resources link. 2. Select the Create button under the Resource Tasks heading. 3. Select Next to proceed with the wizard. 4. Specify the resource name, description, the cluster group the share will reside in and the resource type. The resource type should be network name. Note: A network name resource must reside in the same cluster group as the physical disk resource it will reside on. NAS 4000s and 9000s Installation Guide 45 HP Restricted