HP StorageWorks 4000s NAS 4000s and 9000s Installation Guide - Page 22
Start, StorageWorks NAS, Return to the PC. Select
View all HP StorageWorks 4000s manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
DRAFT 5. The RapidLaunch CD should run automatically. If the program does not start up automatically, the program may be run manually. Click Start, select Run on the Windows taskbar, and then type the following: {CD ROM drive}:\setup.exe Wait for the interface to start. 6. Go to the NAS device and power it on. It will be several minutes before the NAS device is accessible on the network. 7. Return to the PC. Select StorageWorks NAS from the Show drop-down list to have RapidLaunch list all NAS devices on the network, as shown in Figure 1. Template date: 09/2003 Figure 1: RapidLaunch search screen 8. All the NAS devices found on the network are displayed as shown in Figure 2. It may take several minutes for the NAS device to be found on the network. Note: The RapidLaunch utility will refresh periodically, looking for new devices on the network. Refresh the device list manually by selecting the Refresh button (the round green button on the bottom left). 22 NAS 4000s and 9000s Installation Guide HP Restricted