HP StorageWorks MSA 2/8 HP StorageWorks ISL Trunking V3.1.x/4.1.x User Guide ( - Page 49
Operands, Example, See Also, Auto-negotiating mode. The port automatically con s for
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
ISL Trunking Commands Operands Example If the command is specified without an operand, you are prompted to enter the speed value. The output of the portshow command displays the current achieved speed for the port, and the portcfgshow command displays the desired speed setting for the port. This command has the following operands: ■ slotnumber - Specify the number of the blade that the port belongs to. This operand is optional. ■ portnumber - Specify the port number where you want to set the speed. This operand is required. ■ speedlevel - Specify the speed of the port. This operand is optional. Valid level values are one of the following: - 0 - Auto-negotiating mode. The port automatically configures for the highest speed. - 1 - 1 Gbit/sec mode. The port will be at fixed speed of 1 Gbit/sec. - 2 - 2 Gbit/sec mode. The port will be at fixed speed of 2 Gbit/sec. Specifying the speed of port 3 on the port card in slot 2 to 2 Gbit/sec: switch:admin> portcfgspeed 2/3 2 done. See Also Also see the following related commands: switchcfgspeed portshow ISL Trunking Version 3.1.x/4.1.x User Guide 49