HP Surestore 15 Slot with DLT7000 HP SureStore DLT Tape Library Models 4115w/4 - Page 36
Table 1-6, Tape Library with Other Peripherals, Configuration, Cabling, Mode Switch Settings,
View all HP Surestore 15 Slot with DLT7000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Installing the Tape Library Step 5: Set the SCSI Interface Mode Switch Table 1-6 The following table shows connection options when there are other peripherals. Tape Library with Other Peripherals Configuration One-Drive Tape Library: Library on its own bus Maximum performance Cabling Single-ended SCSI connection shown Mode Switch Settings One-Drive Tape Library: Daisy chained to peripheral Minimum host I/O slots used Two-Drive Library: Daisy chained library and peripheral Minimum host I/O slots used Single-ended SCSI connection shown bus 2 not used i rq Two-Drive Library: bus 1 and bus 2 use separate SCSI cards Additional card and cable required Minimum I/O slots used 1-22
1-22
Installing the Tape Library
Step 5: Set the SCSI Interface Mode Switch
The following table shows connection options when there are other peripherals.
Table 1-6
Tape Library with Other Peripherals
Configuration
Cabling
Mode Switch Settings
One-Drive Tape Library:
Library on its own bus
Maximum performance
One-Drive Tape Library:
Daisy chained to
peripheral
Minimum host I/O slots
used
Two-Drive Library:
Daisy chained library and
peripheral
Minimum host I/O slots
used
Two-Drive Library: bus 1
and bus 2 use separate
SCSI cards
Additional card and cable
required
Minimum I/O slots used
Single-ended
SCSI
connection shown
bus 2 not used
Single-ended
SCSI
connection shown