HP Surestore 64 FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Serve - Page 27
Con Ports tab view, column to enable or disable the fabric
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Configuring the Product Figure 4: Configure Ports tab view a. For each port to be configured, type a port name of 24 alphanumeric characters or less in the associated Name field. Note: When naming ports, you may want to name each port based on the device attached to the port. For example, if the port is attached to an e-mail server, you might name the port email1 server port 2. The important point is to relate the name of the port to the device that is attached to the port. b. Click a check box in the Blocked column to block or unblock a port (default is unblocked). A check mark in the box indicates a port is blocked. Blocking a port prevents the attached devices or HP products in the fabric from communicating. A blocked port continuously transmits the offline sequence (OLS). c. Click the check box in the FAN column to enable or disable the fabric address notification (FAN) feature (default is enabled). (The FAN column is available only on the Edge Switch 2/24.) A check mark in the box indicates FAN is enabled. When the feature is enabled, the port transmits a FAN frame after loop initialization to verify that Fibre Channel Arbitrated Loop (FC-AL) devices are still logged in. It is recommended this option be enabled for ports configured for loop operation. Embedded Web Server User Guide 27