HP Surestore 64 FW 05.01.00 and SW 07.01.00 HP StorageWorks Embedded Web Serve - Page 70
Disable Default Zone
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Configuring Zones ■ Enable or disable default zone - To toggle (enable or disable) the default zone state, click Enable Default Zone or Disable Default Zone. Depending on the toggle state, the Default Zone field changes to Enabled or Disabled. ■ Disable zone set - To disable the active zone set and place all attached devices in the default zone, click Disable Zone Set. A confirmation dialog box displays. Click OK to disable the active zone set. ■ Discard changes - To discard unsaved changes made to a zone set configuration and revert to a saved zoning configuration, click Discard Changes. A confirmation dialog box displays. Click OK to discard the changes. 70 Embedded Web Server User Guide
Configuring Zones
70
Embedded Web Server User Guide
■
Enable or disable default zone
— To toggle (enable or disable) the
default zone state, click
Enable Default Zone
or
Disable Default Zone
.
Depending on the toggle state, the
Default Zone
field changes to
Enabled
or
Disabled
.
■
Disable zone set
— To disable the active zone set and place all attached
devices in the default zone, click
Disable Zone Set
. A confirmation
dialog box displays. Click
OK
to disable the active zone set.
■
Discard changes
— To discard unsaved changes made to a zone set
configuration and revert to a saved zoning configuration, click
Discard
Changes
. A confirmation dialog box displays. Click
OK
to discard the
changes.