HP Surestore 64 HP Surestore Director FC-64 Command Line Interface User's Guid - Page 30
Telnet Session, Ethernet Connection Loss
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Telnet Session The CLI can only be used through a Telnet client session in an out-of-band management environment, using the Ethernet port in the director or switch. Although the primary use of the CLI is in host-based scripting environments, the CLI commands can also be entered directly at a command line. Any hardware platform that supports the Telnet client software can be used. Ethernet Connection Loss If the Ethernet cable is disconnected from the director or switch during a Telnet session, one of three scenarios is possible: • Replace the Ethernet cable before the client connection times out, and the Telnet session will continue. • Wait 10 minutes for the client connection times out; then replace the Ethernet cable and restart the connection. • If the client connection has already timed out, open an HP Embedded Web Server (HP EWS) or HP Surestore Director FC-64 Product Manager window. Toggle the enabled state of the Command Line Interface (CLI), thereby clearing the client connection. Restart the client connection. Once the client connection is reestablished, verify your configuration's completeness and accuracy. 18 Telnet Session