HP Surestore 64 HP Surestore Director FC-64 Command Line Interface User's Guid - Page 54
config.switch.raTOV
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Command Example Root> config switch priority principal config.switch.raTOV Syntax raTOV timeoutValue Purpose This command sets the R_A_TOV for the switch. Description The switch must be set offline before this command is entered. Special care should be used when scripting this command due to its relationship with E_D_TOV. Parameters This command has one parameter. timeoutValue Specifies the new R_A_TOV value. The units for this value are tenths of a second. This parameter must be an integer in the range 10-1200 (1 second to 120 seconds), and it must be larger than the E_D_TOV. Command Example Root> config switch raTOV 20 42 config
42
config
Command Example
Root>
config switch priority principal
config.switch.raTOV
Syntax
raTOV timeoutValue
Purpose
This command sets the R_A_TOV for the switch.
Description
The switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its relationship with
E_D_TOV.
Parameters
This command has one parameter.
Command Example
Root>
config switch raTOV 20
timeoutValue
Specifies the new R_A_TOV value. The units for this value are tenths of a
second. This parameter must be an integer in the range 10
–
1200 (1 second
to 120 seconds), and it must be larger than the E_D_TOV.