Home » HP Manuals » Storage Devices » HP Surestore 64 » Manual Viewer

HP Surestore 64 HP Surestore Director FC-64 Command Line Interface User's Guid - Page 62

config.zoning, config.zoning.setDefZoneState, Syntax, Purpose, Description, Parameters

Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

config.zoning Note that the config.zoning commands function in a different way from the other CLI commands, which are single action commands that take effect immediately. A zoning configuration is typically too complicated to be described by a single command, so the first zoning command entered invokes a work area editor. The commands take effect on a temporary copy of a zone set in the work area until the temporary copy in the work area is activated to the fabric--or is discarded. Because not all the verification of the zone set can occur on the temporary copy in the work area, it is possible, however unlikely, that the copy of the zone set encounters no errors until the zone set is activated to the fabric. config.zoning.setDefZoneState Syntax setDefZoneState defaultZoneState Purpose This command enables or disables the default zone and takes effect immediately fabric wide. Description Note This command takes effect immediately in the fabric. Parameters This command has one parameter. defaultZoneState Specifies whether the default zone is enabled. Valid values are true and false. Boolean 1 and 0 may be substituted as values. 50 config

Section	Page
hp surestore director fc-64	1
Error Messages	8
Glossary	8
Index	9
1 Introduction	13
Command Line Interface Overview	14
Entering Command Line Interface Commands	15
Documentation Conventions	15
Navigation Conventions	15
Command Tree	16
Navigation of the CLI Command Tree	20
Limitation on Movements	21
Parameters	22
Output	22
Logging In and Logging Out	23
User Access Rights	23
login	23
logout	25
Using the commaDelim Command	26
commaDelim	26
Handling Command Line Interface Errors	28
Using the Command Line Interface Help	29
Telnet Session	30
Ethernet Connection Loss	30
2 CLI Commands	31
Command Overview	32
config	33
config.ip.ethernet	33
config.ip.show	34
config.port.blocked	35
config.port.extDist	36
config.port.name	37
config.port.type	37
config.port.show	38
config.security.portBinding	39
config.security.portBinding.bound	39
config.security.portBinding.wwn	40
config.security.portBinding.show	42
config.security.userRights	43
config.security.userRights.administrator	43
config.security.userRights.operator	44
config.security.userRights.show	45
config.snmp.addCommunity	46
config.snmp.authTraps	47
config.snmp.deleteCommunity	48
config.snmp.show	48
config.switch	50
config.switch.bbCredit	50
config.switch.edTOV	51
config.switch.interopMode	51
config.switch.prefDomainId	52
config.switch.priority	53
config.switch.raTOV	54
config.switch.rerouteDelay	55
config.switch.show	56
config.system.contact	57
config.system.date	58
config.system.description	59
config.system.location	59
config.system.name	60
config.system.show	60
config.zoning	62
config.zoning.setDefZoneState	62
config.zoning.activateZoneSet	63
config.zoning.deactivateZoneSet	64
config.zoning.replaceZoneSet	64
config.zoning.clearZoneSet	65
config.zoning.addZone	66
config.zoning.deleteZone	66
config.zoning.renameZoneSet	67
config.zoning.addWwnMem	68
config.zoning.addPortMem	69
config.zoning.clearZone	70
config.zoning.deleteWwnMem	70
config.zoning.deletePortMem	71
config.zoning.renameZone	72
config.zoning.showPending	72
config.zoning.showActive	74
maint	76
maint.port.beacon	76
maint.port.reset	77
maint.system.beacon	77
maint.system.clearSysError	78
maint.system.ipl	79
maint.system.resetConfig	79
maint.system.setOnlineState	80
perf	81
perf.class2	81
perf.class3	82
perf.clearStats	84
perf.errors	85
perf.link	87
perf.traffic	88
show	90
show.eventLog	90
show.frus	92
show.ip.ethernet	93
show.loginServer	94
show.nameServer	96
show.port.config	98
show.port.info	99
show.port.status	101
show.port.technology	103
show.security.portBinding	105
show.switch	106
show.system	108
show.zoning	109
Error Messages	111
Glossary	123
A	123
B	123
C	124
D	126
E	127
F	128
G	129
H	130
I	131
L	132
M	132
N	133
O	133
P	135
R	136
S	136
T	138
W	138
Z	138
Index	141
Symbols	141
Numerics	141
A	141
B	141
C	141
D	142
E	142
F	142
G	142
H	142
I	142
L	142
M	142
N	142
O	142
P	143
Q	143
R	143
S	143
T	144
U	144
W	144
Z	144

Match case Limit results 1 per page

config

config.zoning

Note that the config.zoning commands function in a different way from the other CLI

commands, which are single action commands that take effect immediately. A zoning

configuration is typically too complicated to be described by a single command, so the first

zoning command entered invokes a work area editor. The commands take effect on a

temporary copy of a zone set in the work area until the temporary copy in the work area is

activated to the fabric--or is discarded.

Because not all the verification of the zone set can occur on the temporary copy in the

work area, it is possible, however unlikely, that the copy of the zone set encounters no

errors until the zone set is activated to the fabric.

config.zoning.setDefZoneState

Syntax

setDefZoneState defaultZoneState

Purpose

This command enables or disables the default zone and takes effect immediately fabric

wide.

Description

Note

This command takes effect immediately in the fabric.

Parameters

This command has one parameter.

defaultZoneState

Specifies whether the default zone is enabled. Valid values are

true

and

false

Boolean 1 and 0 may be substituted as values.