HP Surestore 64 HP Surestore Director FC-64 Command Line Interface User's Guid - Page 37

config.port.name, Syntax, Purpose, Parameters, Command Example, Root&gt, Description

Get HP Surestore 64 - Director Switch PDF manuals and user guides View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

CLI Commands config.port.name Syntax name portNumber "portName" Purpose This command sets the name for a port. Parameters This command has two required parameters. portNumber portName Specifies the port number. Valid values are: 0-63 for the FC-64 Specifies the name for the port. The port name must not exceed 24 characters in length. Command Example Root> config port name 4 "Sam's tape drive" config.port.type Syntax type portNumber portType Purpose This command sets the allowed type for a port. Description A port can be configured as an F_Port, an E_Port, or a G_Port. If a port is configured as an F_Port, that port cannot be used as an interswitch link, but may attach to a device with an N_Port. If a port is configured as an E_Port, only other switches may attach to that port. If a port is configured as a G_Port, either a device or another switch may attach. config 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
config
25
CLI Commands
config.port.name
Syntax
name portNumber
“
portName
”
Purpose
This command sets the name for a port.
Parameters
This command has two required parameters.
Command Example
Root>
config port name 4
“
Sam
’
s tape drive
”
config.port.type
Syntax
type portNumber portType
Purpose
This command sets the allowed type for a port.
Description
A port can be configured as an F_Port, an E_Port, or a G_Port. If a port is configured as an
F_Port, that port cannot be used as an interswitch link, but may attach to a device with an
N_Port. If a port is configured as an E_Port, only other switches may attach to that port. If
a port is configured as a G_Port, either a device or another switch may attach.
portNumber
Specifies the port number. Valid values are:
0
–
63 for the FC-64
portName
Specifies the name for the port. The port name must not exceed 24
characters in length.