HP Surestore 64 HP Surestore Director FC-64 Command Line Interface User's Guid - Page 41
Parameters, Command Examples, Root>, CLI Commands
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
CLI Commands Parameters This command has two parameters. portNumber boundWwn Specified the port number for which the bound WWN is being set. Valid port number values are: 0-63 for the FC-64 Specifies the WWN of the device that is being bound to the specified port. The value must be entered in colon-delimited hexidecimal notation (for example, 11:22:33:44:55:66:AA:BB). If the boundWwn is configured and the portBindState is: Active-only the device described by boundWwn will be able to connect to the specified port. Inactive-the WWN is retained, but any device can connect to the specified port. Instead of the WWN, either of two values can be entered in this parameter: attached automatically configures the currently attached device WWN as the bound WWN. remove changes the WWN to the default value, 00:00:00:00:00:00:00:00. Even though this removes the WWN-port association, if the portBindingState value set with the config.security.portBinding.bound command is still true (the port binding is active), other devices are prevented from logging in to this port. To allow other devices to log in to this port, use the config.security.portBinding.bound command to set the portBindingState parameter to false. Command Examples Root> config security portBinding wwn 4 AA:99:23:23:08:14 :88:C1 Root> config security portBinding wwn 4 attached Root> config security portBinding wwn 4 remove config 29