HP Surestore 64 HP Surestore Director FC-64 Command Line Interface User's Guid - Page 51
config.switch.edTOV, config.switch.interopMode
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
CLI Commands config.switch.edTOV Syntax edTOV timeoutValue Purpose This command sets the E_D_TOV for the switch. Description The switch must be set offline before this command is entered. Special care should be used when scripting this command due to its relationship with R_A_TOV. Parameters This command has one parameter. timeoutValue Specifies the new E_D_TOV value. The units for this value are tenths of a second. This parameter must be an integer in the range 2-600 (0.2 second to 60 seconds), and it must be smaller than the R_A_TOV. Command Example Root> config switch edTOV 4 config.switch.interopMode Syntax interopMode interopMode Purpose This command sets the Interoperability mode for the switch. config 39
config
39
CLI Commands
config.switch.edTOV
Syntax
edTOV timeoutValue
Purpose
This command sets the E_D_TOV for the switch.
Description
The switch must be set offline before this command is entered.
Special care should be used when scripting this command due to its relationship with
R_A_TOV.
Parameters
This command has one parameter.
Command Example
Root>
config switch edTOV 4
config.switch.interopMode
Syntax
interopMode interopMode
Purpose
This command sets the Interoperability mode for the switch.
timeoutValue
Specifies the new E_D_TOV value. The units for this value are tenths of a
second. This parameter must be an integer in the range 2
–
600 (0.2 second to
60 seconds), and it must be smaller than the R_A_TOV.