HP Surestore 64 HP Surestore Director FC-64 Command Line Interface User's Guid - Page 57
config.system.contact, Output Example, Syntax, Purpose, Parameters, Command Example, Root>
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
CLI Commands Rerouting Delay Interop Mode The rerouting delay that ensures that frames are delivered in order through the fabric to their destination. Values are Enabled or Disabled. Interoperability mode for the switch. Output Example The output from the config.switch.show command displays as follows. BB Credit: 2 R_A_TOV: 20 E_D_TOV: 4 Preferred Domain Id: 1 Switch Priority: Principal Rerouting Delay: Enabled Interop Mode: Open Fabric 1.0 config.system.contact Syntax contact "systemContact" Purpose This command sets the system contact attribute. Parameters This command has one parameter. systemContact Specifies the new system contact string for the director or switch. The contact can contain 0-255 characters. Command Example Root> config system contact "Joe" config 45