HP Surestore S10 Service and User Manual (Short- and Long-Wave) - Page 106
Supported Distances
View all HP Surestore S10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 106 highlights
Supported Distances Table 11 summarizes the supported distances between a host and devices connected to short-wave ports with 50-micron and 62.5-micron cables and long-wave ports with 9-micron cables. The table does not include combinations of mixed cable lengths. Table 11 Supported Cable Distances Connection Short-Wave1 50 micron (multimode) Short-Wave1 62.5 micron (multimode) Host to Hub Hub to Hub 500 m 500 m 175 m 175 m Hub to Device Total 500 m 1500 m 175 m 525 m Long-Wave2 9 micron (single-mode) Not supported 3 km 3 Not supported Varies 1 Ports 1-10 on short-wave hub; ports 1-9 on long-wave hub 2 Long-wave port on long-wave hub 3 Under certain conditions, single-mode 9-micron cables are supported at distances up to 10 km (see page 105 for more information). The 10-km capability is supported only for long-wave hubs connected to HP-UX servers. Model S10 Short-Wave Hub Note Stated distances assume 50-micron multimode cable. The short-wave hub supports distances up to 500 meters between a server host and the hub, between a hub port and a connected FC-AL device, and between two short-wave hubs. The maximum distance between a host server and FC-AL devices connected to cascaded short-wave hubs is 1500 meters. 104 Operating Requirements