HP Surestore S10 Service and User Manual (Short- and Long-Wave) - Page 58

the hub is reset with bypass persistence

Get HP Surestore S10 - Hub PDF manuals and user guides View all HP Surestore S10 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 58 highlights

The Set System OID Menu appears with the new setting. Set System OID Menu: [current = 1.3.6.1.4.1.11.2.3.7.5.10] 1. Return to Manufacturing Settings Menu or enter new system OID suffix in dotted decimal format The suffix entered will be appended to 1.3.6.1.4.1 example: if desired system OID is 1.3.6.1.4.1.2.3.4, then enter 2.3.4 > 7. Verify that the setting is correct, then enter 1 to return to the Manufacturing Settings Menu. Manufacturing Settings Menu: 1. Return to Main Menu 2. Set sysdescr [current = HP A3724A FC-AL Shortwave Hub] 3. Set system OID [current = 1.3.6.1.4.1.11.2.3.7.5.10] 4. Toggle port bypass persistence mode [current = Enabled] > If you are using Fibre Channel Manager to manage the hub, the bypass persistence setting controls the behavior of bypassed ports when the hub is power cycled or reset. If the hub is power-cycled or reset with bypass persistence disabled, the hub automatically enables all ports that were previously bypassed in Fibre Channel Manager. If the hub is reset with bypass persistence enabled, the hub continues to bypass ports that were bypassed in Fibre Channel Manager. 8. Enter 4 to disable port bypass persistence. Verify that the port bypass persistence mode is disabled. Manufacturing Settings Menu: 1. Return to Main Menu 2. Set sysdescr [current = HP A3724A FC-AL Shortwave Hub] 3. Set system OID [current = 1.3.6.1.4.1.11.2.3.7.5.10] 4. Toggle port bypass persistence mode [current = Disabled] > 9. Enter 1 to return to the Main menu. 10. Exit the terminal emulator application and disconnect the serial cable from the hub and the PC. 56 Updating the Hub Firmware

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
56
Updating the Hub Firmware
The Set System OID Menu appears with the new setting.
Set System OID Menu: [current = 1.3.6.1.4.1.11.2.3.7.5.10]
1. Return to Manufacturing Settings Menu
or enter new system OID suffix in dotted decimal format
The suffix entered will be appended to 1.3.6.1.4.1
example: if desired system OID is 1.3.6.1.4.1.2.3.4, then enter
2.3.4
>
7.
Verify that the setting is correct, then enter
1
to return to the Manufacturing Settings
Menu.
Manufacturing Settings Menu:
1. Return to Main Menu
2. Set sysdescr [current = HP A3724A FC-AL Shortwave Hub]
3. Set system OID [current = 1.3.6.1.4.1.11.2.3.7.5.10]
4. Toggle port bypass persistence mode [current = Enabled]
>
If you are using Fibre Channel Manager to manage the hub, the bypass persistence setting
controls the behavior of bypassed ports when the hub is power cycled or reset.
If the hub is power-cycled or reset with bypass persistence
disabled
, the hub
automatically enables all ports that were previously bypassed in Fibre Channel Manager. If
the hub is reset with bypass persistence
enabled
, the hub continues to bypass ports that
were bypassed in Fibre Channel Manager.
8.
Enter
4
to disable port bypass persistence. Verify that the port bypass persistence mode
is
disabled
.
Manufacturing Settings Menu:
1. Return to Main Menu
2. Set sysdescr [current = HP A3724A FC-AL Shortwave Hub]
3. Set system OID [current = 1.3.6.1.4.1.11.2.3.7.5.10]
4. Toggle port bypass persistence mode [current = Disabled]
>
9.
Enter
1
to return to the Main menu.
10.
Exit the terminal emulator application and disconnect the serial cable from the hub and
the PC.