HP Vectra XA 5/xxx HP Vectra xA 5/XXX Series 5 Pc DESKTOP USER’S GUID - Page 74
Configuring the PCI Integrated Ethernet Interface, Saving Your Changes and Leaving SETUP
View all HP Vectra XA 5/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
3 The HP Setup Program Configuring Your Network Connection Configuring the PCI Integrated Ethernet Interface Configuration of the I/O Address, Hardware Interrupt, and DMA channel are made automatically for the HP Enhanced PCI Ethernet interface. Use SETUP to enable or disable the Enhanced PCI Ethernet interface. To disable/enable the Enhanced PCI Ethernet interface: 1 Use the or key to select the Configuration menu. 2 Press to highlight the line Integrated Network Interface and press to select the submenu. 3 Press or interface. to disable or enable the integrated Ethernet Enable or disable the interface as required. Saving Your Changes and Leaving SETUP When you have made all your changes, you must save them and exit SETUP. To save changes and exit SETUP: 1 Press twice to enter the Exit menu. 2 Select Save changes and Exit to save your changes and exit SETUP. The PC will automatically restart. If you set a User Password, the PC will display the power-on prompt. Enter the User Password to use the PC. You have now completed the setting up procedure. You are now ready to install the LAN drivers. 62 English