HP XM600 hp kayak xm600, installing and replacing hardware parts in your pc wo - Page 40

HP Kayak XU800 PC Workstation, Switch, Default Position, To Con Do Not change Default Setting

Get HP XM600 - Kayak - 128 MB RAM PDF manuals and user guides View all HP XM600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 40 highlights

Installing and Replacing Hardware Parts in Your PC Workstation System Board Switches HP Kayak XU800 PC Workstation There are ten system board switches used for configuration, numbered from 1 to 10. Of these a certain number are reserved and should not be modified, otherwise it could lead to a system failure. Switch Default Position To Configure: 1 UP Enables normal mode. DOWN enables the BIOS recovery mode at next boot. 2 UP Reserved. Do Not change Default Setting 3 UP Enables User and System Administrator passwords. DOWN clears the passwords at next boot. 4 UP Retains CMOS memory. DOWN clears CMOS memory at next boot. 5 UP Reserved 5-6. Do Not change Default Settings 6 DOWN 7 DOWN Enables keyboard power-on. UP disables this option. 8 DOWN 9 DOWN Reserved 8-10. Do Not change Default Settings 10 UP NOTE Switches can also be referenced as: UP = Open = Off (disable) DOWN = Close = On (enable) 40

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
Installing and Replacing Hardware Parts in Your PC Workstation
System Board Switches
40
HP Kayak XU800 PC Workstation
There are ten system board switches used for configuration, numbered
from 1 to 10. Of these a certain number are reserved and should not be
modified, otherwise it could lead to a system failure.
NOTE
Switches can also be referenced as:
UP = Open = Off (disable)
DOWN = Close = On (enable)
Switch
Default Position
To Configure:
1
UP
Enables normal mode.
DOWN enables the BIOS recovery mode at next boot.
2
UP
Reserved.
Do Not change Default Setting
3
UP
Enables User and System Administrator passwords.
DOWN clears the passwords at next boot.
4
UP
Retains CMOS memory.
DOWN clears CMOS memory at next boot.
5
UP
Reserved 5-6.
Do Not change Default Settings
6
DOWN
7
DOWN
Enables keyboard power-on.
UP disables this option.
8
DOWN
Reserved 8-10.
Do Not change Default Settings
9
DOWN
10
UP