HP d640 HP D640 High-Volume Printer - User Manual (Printer and Accessories), C - Page 197
Maintenance.alignment, Online, tray2, duplex, Select, duplex lengthwise.
View all HP d640 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 197 highlights
Adjusting Paper Path Alignment 6. Select tray1 and press Ǡ. This is the Maintenance.alignment screen, shown in Figure 6-16. Maintenance.alignment tray1 = 5 tray2 = 6 tray3 = 5 duplex = -6 duplexv = -7 Online Online Figure 6-16 Maintenance.alignment Tray1 setting 7. Press either į or Ĭ to highlight the tray1 new value calculated on the Simplex feed alignment ruler sheet. The selection range is from -25 to +25, (except for duplex lengthwise, which is +7 to -7). See Figure 6-17. Maintenance.alignment.tray1 = 5 6 7 8 9 Online 10 Online Select Figure 6-17 Tray1 values 8. Press Select to save the new value and to return to the Maintenance.alignment submenu. 9. Repeat steps 1 through 4 for trays 2, 3, HCI, duplex (duplex sideways), and duplexv (duplex lengthwise). 10. Verify your alignment by repeating the procedure in "Printing Alignment Sheets" on page 6-12. If the alignment is still off (plus or minus 3 to 4 increments or more), note the adjustment values as you did in the previous alignment procedure, and set the new adjustment values in the Control Panel. Note A 1 or 2 increment variation may remain after alignment; this is normal. 6-22 Advanced Topics